Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust of the Suzuki GSX-R 1000, you need to loosen the screws that secure the exhaust to the corresponding supports, so that it can be removed from its housing. Once the exhaust mounting screws have been removed, it will be possible to widen the mounting ring that connects it to the remaining exhaust pipe. At this point, it will be possible to completely detach the old exhaust from its seat, inserting the new replacement piece: this can be properly secured, in order to ensure that the exhaust functions correctly.

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Suzuki GSX-R 1000?
How to Replace the Clutch on the Suzuki GSX-R 1000?
Gsxr 1000 .. You can replace the clutch on the Suzuki GSX-R 1000 by loosening the screws that secure the side cover panel of the clutch, located on the right side.. …
How to Replace the Battery of the Suzuki GSX-R 1000
How to Replace the Battery of the Suzuki GSX-R 1000
Gsxr 1000 .. remove and replace the battery of the Suzuki GSX-R 1000 motorcycle. First, place your motorcycle on a stand and begin undoing the screws of the plastic.. …
How to Replace Coolant on Suzuki GSX-R 1000
How to Replace Coolant on Suzuki GSX-R 1000
Gsxr 1000 .. the coolant or antifreeze on the Suzuki GSX-R 1000. First, remove the coolant bleed hose by loosening the metal clamp; then let the fluid drain into.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos