Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the headlight bulb of the Suzuki Address, you need to reach inside the front wheel arch so that you can access the inside of the corresponding headlight. Here, you will need to grab the connector that is connected to the bulb, so that you can disconnect it. The old bulb can then be removed from its socket so that the new one can be connected to the connector. Once connected, it must be inserted into the headlight assembly to ensure that everything works correctly.

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Address 110 In order to replace the headlight bulb of the Suzuki Address 110, you need to completely remove the rearview mirrors so that they can be rotated coun…
Address 110 As shown in this tutorial, replacing the stop light bulb on a Suzuki Address 110 scooter is an extremely simple and quick task. Before proceeding, en…
Address 110 To replace the rear shock absorber on the Suzuki Address 110, open the under-seat compartment to loosen the protective panel at the rear of the compa…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos