Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Suzuki Burgman 125 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a socket wrench. Let all the oil contained in the system drain out, open the filter cap, insert the replacement and tighten the drain plug. At this point, all that's left is to pour in the required amount of oil through the designated hole.

Posted on 25 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on a Suzuki Burgman 125 scooter?
How to change the engine oil on a Suzuki Burgman 125 scooter?
Burgman 125 In this tutorial, you will see how to change the engine oil on a Suzuki Burgman 125 scooter, an extremely simple and quick operation. First, wait unt…
How to replace the engine oil in the Suzuki Burgman 125 scooter?
How to replace the engine oil in the Suzuki Burgman 125 scooter?
Burgman 125 .. In this tutorial we can see how to replace the engine oil in the Suzuki Burgman 125 scooter, an extremely simple and quick operation... …
How to Change the Engine Oil in a Suzuki Burgman 125 Scooter?
Burgman 125 In this tutorial, see how to change the engine oil in a Suzuki Burgman 125 scooter, a very simple and quick operation to perform every 12 months. Fir…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos