Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Suzuki V-Strom 800?

Model: Suzuki V Strom 800
Part: Engine oil

Video tutorial

To change the engine oil of a Suzuki V-Strom 800, start by placing the bike on a centre stand to ensure adequate stability. Under the engine, locate the oil drain plug, usually found at the bottom of the sump.

Use an appropriate spanner to unscrew the plug and allow the used oil to drain into a suitable container. Once the oil has completely drained, reinsert and tighten the drain plug.

Next, locate the oil fill area, typically situated at the top of the engine. Pour in the new oil, using a funnel to avoid spills.

Carefully check the oil level and add more oil if necessary. Finally, start the engine for a few minutes and check for any leaks around the drain plug area.

Ensure that the oil level is correct and that there are no leaks.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Suzuki V-Strom 800?
How to replace the engine oil in the Suzuki V-Strom 800?
V Strom 800 .. see how to replace the motor oil in the Suzuki V-Strom 800, an extremely simple and fast operation. First of all, we wait for the engine to be cold enough,.. …
How to replace the motor oil in the Suzuki V-Strom 800?
How to replace the motor oil in the Suzuki V-Strom 800?
V Strom 800 .. how to replace the engine oil in the Suzuki V-Strom 800, a very simple and quick operation. First of all, make sure that the engine is cold enough,.. …
How to adjust the time on the Suzuki V-Strom 800?
How to adjust the time on the Suzuki V-Strom 800?
V Strom 800 .. can see how to adjust the time on the Suzuki V-Strom 800, an extremely simple and quick operation, to be carried out for example after disconnecting.. …

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos