Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Suzuki Baleno
  6. : Warning light – error code

Suzuki Baleno - Warning light – error code

Warning Light – Error Code Suzuki Baleno (2015-2020 / mk 2)

Suzuki Baleno (2015-2020 / MK 2)
How to Reset the Service on a Suzuki Baleno

In this video, you will see how to reset the service on a Suzuki Baleno; this is a useful operation after performing a DIY service. If you take the car to an …Read all…
Posted on 17 June 2026 by ScegliAuto
Suzuki Baleno (2015-2020 / MK 2)
Resetting the Flat Tyre Warning Light on a Suzuki Baleno

How do you reset the flat tyre warning light on a Suzuki Baleno? Enter the vehicle and turn on the ignition. Press and hold the button located above the …Read all…
Posted on 17 May 2026 by ScegliAuto

Airbag (1) Antenna (1) Key (1) Timing belt (1) Cabin air filter (1) Diesel fuel filter (1) Handle (1) Front bumper (1) Fuel pump (2) Instrument cluster (1) Warning light – error code (2) Tire pressure warning light (1) Service warning light (1)

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos