Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Suzuki Baleno

Model: Suzuki Baleno MK 2 - Years 2015-2020
Part: Warning light – error code

In this video, you will see how to reset the service on a Suzuki Baleno; this is a useful operation after performing a DIY service. If you take the car to an official dealer, they should carry out this operation in the workshop. Start by turning on the ignition, turning the key to position one or pressing the start & stop button once. Now press the instrument cluster stalk and rotate it until you find the desired option, namely 'oil change'. Press once to enter a submenu; scroll down and press reset. Operation completed, simple and quick.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a Suzuki Baleno
How to Remove the Instrument Cluster from a Suzuki Baleno
Suzuki Baleno (1995-2007 / MK 1) Before starting, sit in the driver's seat of your Suzuki Baleno. Begin by unscrewing and removing the screw that secures the instrument cluster trim.…
Resetting the Tyre Warning Light on Suzuki Baleno
Resetting the Tyre Warning Light on Suzuki Baleno
Suzuki Baleno (2015-2020 / MK 2) To reset the tyre warning light on a Suzuki Baleno, first, turn on the ignition. Below the speedometer, on your right, you will notice a long button …
Resetting the Service Light on the Suzuki Baleno
Resetting the Service Light on the Suzuki Baleno
Suzuki Baleno (2015-2020 / MK 2) In this brief and simple guide, you will discover how to reset the oil change maintenance light on the Suzuki Baleno. First, get in the car and turn …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos