Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Suzuki Baleno

Model: Suzuki Baleno MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Instrument cluster

Video tutorial

Before starting, sit in the driver's seat of your Suzuki Baleno. Begin by unscrewing and removing the screw that secures the instrument cluster trim.

Next, unclip and remove the trim itself. This will give you access to the screws securing the instrument cluster.

Proceed by unscrewing and removing these screws, then extract the instrument cluster from the dashboard. Once this step is complete, disconnect the rear electrical connector to fully remove the instrument cluster, and the disassembly will be finished.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Suzuki Baleno
Resetting the Service Light on the Suzuki Baleno
Suzuki Baleno (2015-2020 / MK 2) In this brief and simple guide, you will discover how to reset the oil change maintenance light on the Suzuki Baleno. First, get in the car and turn …
Resetting the Tyre Warning Light on Suzuki Baleno
Resetting the Tyre Warning Light on Suzuki Baleno
Suzuki Baleno (2015-2020 / MK 2) To reset the tyre warning light on a Suzuki Baleno, first, turn on the ignition. Below the speedometer, on your right, you will notice a long button …
Resetting the Flat Tyre Warning Light on a Suzuki Baleno
Resetting the Flat Tyre Warning Light on a Suzuki Baleno
Suzuki Baleno (2015-2020 / MK 2) How do you reset the flat tyre warning light on a Suzuki Baleno? Enter the vehicle and turn on the ignition. Press and hold the button located above …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos