Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Sx4
    4. : Tail light

Suzuki Sx4 - Tail light

Tail Light Suzuki Sx4 (2006-2014 / mk 1, rw, ey, gy)

Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY)
How to Remove the Rear Light of a Suzuki SX-4
The rear light of the Suzuki SX-4 can be removed by lifting the rear hatch of the car, allowing access to the screws that secure the light from its inner side: …Read all…
Posted on 11 September 2026 by ScegliAuto
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY)
Remove the Rear Lights on Suzuki Sx4
Is the rear light on your Sx4 broken? Here’s how to remove the damaged light. Lift the tailgate of the boot, unscrew the securing screws located at the sides …Read all…
Posted on 25 April 2026 by ScegliAuto
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY)
How to Change the Bulbs on a Suzuki Splash
How to change the bulbs on a Suzuki Splash? In this video, learn how to replace the bulbs. Open the boot, using a screwdriver, unscrew (with a socket wrench or …Read all…
Posted on 3 April 2026 by ScegliAuto
Airbag (1) Alternator (4) Shocks (1) Antenna (1) Car stereo (3) Battery (1) Control arm (2) Transmission (2) Spark plugs (4) Key (6) Timing belt (10) V-belt (1) Onboard computer (1) Checks and maintenance (4) Dashboard (1) Differential (1) Brake rotors (1) Tail light (3) Fog lights (1) Air filter (4) Cabin air filter (10) Diesel fuel filter (2) Oil filter (1) Parking brake (3) Light bulb (4) Headlight bulb (7) Tail light bulb (1) License plate light (1) Handle (1) Engine oil (2) Clock (8) Door trim panel (5) Rear bumper (2) Brake pads (5) Tires (1) Instrument cluster (3) Fuse box (9) Side mirror (5) Warning light – error code (7) Tire pressure warning light (7) Service warning light (23) Brake drums and shoes (1) Fuel cap (1) Windshield wipers (2) Thermostat (4) Side window (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos