Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulbs on a Suzuki Splash

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Tail light

How to change the bulbs on a Suzuki Splash? In this video, learn how to replace the bulbs. Open the boot, using a screwdriver, unscrew (with a socket wrench or screwdriver with insert) the securing nuts located at the side of the rear light, once the light is free from any constraints, you can detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical size and voltage pieces. Finally, remount the light and reverse the assembly of the other parts. Test the correct functioning of the bulbs.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Change Rear Headlight Bulb on a Suzuki Sx4
Change Rear Headlight Bulb on a Suzuki Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Changing the bulbs on a Suzuki Sx4? Remove the rear headlight bulbs on a Suzuki Sx4. Open the boot lid, and using a screwdriver, unscrew the securing…
Replace Front Headlight Bulbs on a Sx4
Replace Front Headlight Bulbs on a Sx4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Are the bulbs on the Sx4 due for replacement? Let's remove and replace the bulbs. Open the front bonnet by pulling the lever located at the bottom ri…
Replacing Front Headlamp Bulb on Suzuki SX4
Replacing Front Headlamp Bulb on Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Are the bulbs in the front headlamp of your Suzuki SX4 blown and need changing? Here's how to replace them. Open the front bonnet where the headlamps…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos