Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change Rear Headlight Bulb on a Suzuki Sx4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Tail light bulb

Changing the bulbs on a Suzuki Sx4? Remove the rear headlight bulbs on a Suzuki Sx4. Open the boot lid, and using a screwdriver, unscrew the securing screws located at the side of the headlight (right or left). Disconnect the rear light from its housing once all screws are removed (unplug the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Refit the headlight and reconnect the power connectors. Test the correct functioning of the headlight bulbs by operating the controls after turning on the car's ignition.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulb on Suzuki SX4
Replacing Front Headlamp Bulb on Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Are the bulbs in the front headlamp of your Suzuki SX4 blown and need changing? Here's how to replace them. Open the front bonnet where the headlamps…
How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
How to Replace the Front Headlamp Bulb on the Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Today, follow these instructions to replace the front headlamp bulb on the Suzuki SX4 and Fiat Sedici. First, open the bonnet and remove the plastic …
Replacing Front Headlamp Bulb on Suzuki SX4 - Fiat Sedici
Replacing Front Headlamp Bulb on Suzuki SX4 - Fiat Sedici
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a Suzuki SX4, which is similar to the Fiat Sedici. First, open…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos