Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Suzuki SX-4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

The rear light of the Suzuki SX-4 can be removed by lifting the rear hatch of the car, allowing access to the screws that secure the light from its inner side: once these screws are loosened, the light can be extracted from its housing by disconnecting the connector located inside.

Once the optical unit has been completely freed, you can connect the new one: this should then be inserted back into its housing, securing it with the appropriate side screws relative to the light.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Change the Bulbs on a Suzuki Splash
How to Change the Bulbs on a Suzuki Splash
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) How to change the bulbs on a Suzuki Splash? In this video, learn how to replace the bulbs. Open the boot, using a screwdriver, unscrew (with a socket…
Removing Door Panel on Suzuki Sx4
Removing Door Panel on Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Removing the door panel of a Suzuki Sx4? Let's see how to remove the rear panel. Use a plastic trim tool to remove the screw cover in the door handle…
How to Replace the Remote Battery in a Suzuki SX4?
How to Replace the Remote Battery in a Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) As we can see in this tutorial, replacing the remote battery in the Suzuki SX4 is an extremely simple and quick task. To do this, you will only need …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos