Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the antenna of the Suzuki Ignis?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Antenna

In order to replace the antenna of the Suzuki Ignis, you will need to grab the old component so that it can be rotated counterclockwise and removed from its housing: once the old antenna has been completely removed, you can proceed by inserting the connector of the new one into the housing where the old antenna was located. Then you can secure it by covering the connector of the old antenna and fixing it to its housing: after installation, you will need to turn on the radio to verify that it functions correctly.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna on the Suzuki Ignis
How to Replace the Antenna on the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) To replace the antenna on the Suzuki Ignis, loosen the screws securing the antenna to its housing, which will also free it from the power cable. Once…
How to Remove the Radio from a Suzuki Ignis
How to Remove the Radio from a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Learn how to remove the original radio from a Suzuki Ignis. First, use a plastic lever to remove the lower and upper covers of the radio as shown in …
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

Other guides you may be interested in

    Frequently Asked Questions

    • Ignis 2016-2024 - How to remove the radio antenna of a Suzuki Ignis? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos