Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on the Suzuki Ignis

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Antenna

To replace the antenna on the Suzuki Ignis, loosen the screws securing the antenna to its housing, which will also free it from the power cable. Once the old antenna is completely disconnected, connect the new one to the appropriate power cable. After connecting the new antenna, position it in its housing and secure it with the corresponding screw. After installation, check that everything functions correctly with the new antenna.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the antenna of the Suzuki Ignis?
How do you replace the antenna of the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) In order to replace the antenna of the Suzuki Ignis, you will need to grab the old component so that it can be rotated counterclockwise and removed f…
How to Remove the Radio from a Suzuki Ignis
How to Remove the Radio from a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Learn how to remove the original radio from a Suzuki Ignis. First, use a plastic lever to remove the lower and upper covers of the radio as shown in …
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

    Frequently Asked Questions

    • Ignis 2016-2024 - How to remove the radio antenna of a Suzuki Ignis? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos