Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Suzuki Ignis?

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Clock

To change the clock on the Suzuki Ignis, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is turned on, you can press and hold the button located below the speedometer until the hours start flashing. You can then adjust the hours by turning the button to the right of the instrument panel, and then press the button below the speedometer again. This will make the minutes start flashing, which can also be adjusted in the same way.

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Suzuki Ignis
How to adjust the clock of the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Let's see how to adjust the clock of a Suzuki Ignis. In this vehicle there are two clocks to be adjusted separately: one on the dashboard and one on …
How to set the clock on the Suzuki Ignis?
How to set the clock on the Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) To set the clock on the Suzuki Ignis, turn on the ignition so you can press the INFO button located to the right of the dashboard. This will bring up…
How to Set the Clock on a Suzuki Ignis?
How to Set the Clock on a Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) To set the clock on the Suzuki Ignis, go inside the cabin and turn on the instrument panel. Next, press the INFO button located to the right of the i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos