Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Find the Tyre Pressure Sticker on a Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tires

See other generations:
Video tutorial

In this video, we will see where to find the sticker with the reference values for tyre pressure on a Suzuki Swift. On the driver’s side pillar, you will find a sticker that lists the pressure values for the front and rear tyres, either fully loaded or with just the driver.

The values are expressed in PSI (pounds per square inch), which is the measurement used in Anglo-Saxon countries, and in bar (which is the measurement used in the EU). You may also find the indication in kPa (kiloPascal), which is the universal measurement worldwide.

The conversion is: 1 PSI = 0.06895 bar; 1 Bar = 100 kPa. If you cannot find the sticker (perhaps because you bought the car used), check the values in the owner’s manual, where they are surely noted in the "tyres" section.


Posted on 31 March 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Light on a Suzuki Swift
Resetting the Tyre Pressure Light on a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) In today's video guide, see how to reset the tyre pressure light on a Suzuki Swift, a fifth-generation model produced from 2010 to 2017. There are no…
Where can we find the indication of the tire pressure on our Suzuki Swift?
Where can we find the indication of the tire pressure on our Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) If we want to find the recommended tire pressure for our vehicle, our "sacred book" should be the owner's manual. However, if we don't have it on han…
How to Reset the Tyre Pressure Warning Light on the Suzuki Swift?
How to Reset the Tyre Pressure Warning Light on the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To reset the tyre pressure warning light on the Suzuki Swift, first inflate the tyres to the correct pressure value, which is indicated on the sticke…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos