Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Suzuki Ignis?

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Air filter

If your Suzuki Ignis, produced from 2016 onwards, has reached the necessary mileage for a service, it means that, among other maintenance tasks, you will need to replace the air filter. To perform the DIY replacement, follow this simple guide: open the engine compartment; in front of you, near the windscreen, you will see the airbox (a black box with a tube coming out of it). Disconnect the connector on the right side of the airbox and the tube on the left side, then lift the top part of the airbox, remove any dust and dirt inside the airbox, and replace the air filter. Finally, close everything by following the reverse procedure.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Air Filter on a Suzuki Ignis
How to Change the Engine Air Filter on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) In this video, we will see how to change the air filter on the Suzuki Ignis; first, open the bonnet and, by opening the clips that hold the air intak…
How to Set the Time on a Suzuki Ignis
How to Set the Time on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…
How to replace the air filter on the Suzuki Ignis?
How to replace the air filter on the Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To replace the air filter on the Suzuki Ignis, open the bonnet to access the box containing the filter, located in the centre of the engine compartme…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos