Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Suzuki Ignis?

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Air filter

To replace the air filter on the Suzuki Ignis, open the bonnet to access the box containing the filter, located in the centre of the engine compartment. To remove the filter, you will need to unclip the pins that secure the cover so that the filter can be extracted from within. Once it has been removed, you can insert the new replacement part; it should be secured in its place by closing the cover with the respective pins. Finally, close the bonnet and check that everything functions correctly.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Suzuki Ignis?
How to Replace the Air Filter on a Suzuki Ignis?
Suzuki Ignis (2016-2024 / MK 3) If your Suzuki Ignis, produced from 2016 onwards, has reached the necessary mileage for a service, it means that, among other maintenance tasks, you …
How to Change the Engine Air Filter on a Suzuki Ignis
How to Change the Engine Air Filter on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) In this video, we will see how to change the air filter on the Suzuki Ignis; first, open the bonnet and, by opening the clips that hold the air intak…
How to Replace the Cabin Filter on the Suzuki Ignis?
How to Replace the Cabin Filter on the Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To replace the cabin filter on the Suzuki Ignis, open the glove compartment located on the passenger side. Once open, detach the internal fixing clip…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos