Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does Installing a LED Bar on an Off-Roader Entail?

Model: Suzuki Jimny Jb43, Jb23, Jb53, Jb33 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

This video, more about the regulations regarding LED bars that many off-roaders install on their vehicles, explains that the LED bar is used to illuminate dirt roads at night and is absolutely prohibited on normal roads. It must be covered and disconnected, as it is illegal on the road.

It is good to know this before incurring the expense (which is relatively low, as the one in the video, code B07GXH9HQD, costs only £49.99) and the installation work, which may be more demanding. If the off-roader is used only on Sundays during the day, the LED bar is of no use. It is useful if used for full camping and the vehicle is also used at night.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Oil Filter Replacement for Suzuki Jimny
Oil Filter Replacement for Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb23, Jb53, Jb33) In this video tutorial, you will learn how to replace the oil filter on a Suzuki Jimny. First, open the bonnet from inside the car and remove the eng…
Assembly errors on the DAB radio antenna.
Assembly errors on the DAB radio antenna.
Suzuki Jimny (1998-2018 / Jb43, Jb23, Jb53, Jb33) In this video, we see the common mistakes in mounting DAB antennas: the most common mistake is mounting the antenna in a horizontal position or, wors…
How to remove the partition grid of the Suzuki New Jimny
How to remove the partition grid of the Suzuki New Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) To remove the partition grille of the Suzuki Jimny, we need to open the trunk and the front doors of the vehicle. Immediately after, we recline both …

How to Open the Fuel Flap and Cap on an MG HS

This guide will show you how to open the fuel flap and cap on an MG HS in simple steps. To open the fuel flap, ensure the vehicle is unlocked; then press on the edge of the flap to open it, as shown in the video. Next, unscrew the fuel cap counterclockwise to refuel at the pump; once finished, screw the cap back on until it clicks, and finally close the fuel flap!

Watch the video!


by ScegliAuto

More videos