Do it yourself
Frequently asked questions about cars and motorcycles

Assembly errors on the DAB radio antenna.

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antenna

See other generations:
Video tutorial

In this video, we see the common mistakes in mounting DAB antennas: the most common mistake is mounting the antenna in a horizontal position or, worse, under darkening or shielding materials; in fact, these are antennas that are often "fin" shaped, designed for vertical reception.

Horizontal mounting drastically reduces signal reception, and conductive materials block radio waves.

The solution is therefore to mount the antenna in a vertical position, at the highest and least shielded point (if it is a glass antenna). Additionally, the copper part (the tab and ground connector) must be installed in a spot where the metal is not shielded by paint.

The connectors of the antenna or coaxial cable must be inserted correctly; they should not be loose or oxidized. Furthermore, the coaxial cable should neither be too long nor of low quality; let’s ensure that the antenna is specific for DAB/DAB+; antenna cables should not be close to high-voltage cables, inverters, or other noisy devices.


Posted on 27 December 2025 by ScegliAuto


Related tutorials

Suzuki Jimny (2018-2026 / Jb74w, Jb64w) Today, you will learn a very simple operation that many may not know: replacing the antenna. In this case, we have a Suzuki Jimny as an example. To r…
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To replace the antenna on a Suzuki Jimny, remove the screws securing the mount on the roof, where the antenna is located. Next, open the plastic cove…
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) Installing wind deflectors on the front windows of the Suzuki Jimny reduces annoying turbulence when driving with the windows down and allows you to …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos