Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Suzuki Jimny?

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Antenna

To replace the antenna on a Suzuki Jimny, remove the screws securing the mount on the roof, where the antenna is located. Next, open the plastic cover located under the steering wheel, where all the cables are found: here, you will also find the antenna connector, which must be disengaged to slide the antenna out from the top of the car. At this point, disconnect the connector from the old antenna and connect it to the new one. Finally, insert the new antenna and cables back into their housing and secure everything again.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Antenna on a Suzuki Ignis
Replacing the Antenna on a Suzuki Ignis
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Today, you will learn a very simple operation that many may not know: replacing the antenna. In this case, we have a Suzuki Jimny as an example. To r…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…
How to Fit Roof Bars on a Suzuki Jimny
How to Fit Roof Bars on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can begin, you need to exit the cabin of your Suzuki Jimny. Start by removing the plastic inserts located at the upper corners of the roof…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos