Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to paint the steering wheel of the Suzuki Samurai.

Model: Suzuki Samurai Sj30, JA, JB, Sj40 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Steering wheel

Video tutorial

This video, made using stop-motion technique, shows us how to easily paint the steering wheel of a Suzuki Samurai. After removing it from the steering column of the vehicle, we place it in a press so we can work on it comfortably.

Since the steering wheel in question has dirty, rusty spokes, the first thing we do is clean it thoroughly and then try to remove the rust using fine-grit sandpaper, but only after properly masking the horn and the connection parts with the leather rim of the steering wheel with masking tape.

Once this is done, we can apply several light coats of paint (in this case, black), allowing it to dry well between each coat.

When the desired coverage effect is achieved and the paint is dry, we can remove the masking and put the steering wheel back on the column.


Posted on 23 December 2025 by ScegliAuto


Related tutorials

Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…
Replacing the Thermostat on Suzuki Samurai
Replacing the Thermostat on Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Lift the bonnet and place the support rod. Locate the cover containing the thermostat of your Suzuki Samurai by watching the video: note how it is in…
How to Replace the Analogue Clock on Suzuki Samurai
How to Replace the Analogue Clock on Suzuki Samurai
Suzuki Samurai (1989-2003 / Sj30, JA, JB, Sj40) Today, you will learn a very simple maintenance task. To remove the central analogue clock on your Suzuki Samurai, use a plastic lever (not metal!) o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos