Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Analogue Clock on Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Clock

Today, you will learn a very simple maintenance task. To remove the central analogue clock on your Suzuki Samurai, use a plastic lever (not metal!) or a small screwdriver to pry out the casing. Carefully lever around the plastic of the clock, gently lifting it. Disconnect the connection (related to the clock's illumination) and connect the new part you purchased. Snap it into place by gently pushing on all sides of the new clock to avoid damaging it. Clean it up and check that the hands are functioning correctly.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wing Mirrors on a Suzuki Samurai
Replacing the Wing Mirrors on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In this brief guide, we will see the instructions to remove and replace the external wing mirror on a Suzuki Samurai. First, open the front door and …
How to Replace the Engine Oil Pump on a Suzuki Samurai
How to Replace the Engine Oil Pump on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide shows you how to dismantle and replace the engine oil pump on a Suzuki Samurai, as well as on a Jimny. In this case, the oil pump has alre…
Removing Fuel Tank from Suzuki Samurai
Removing Fuel Tank from Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today's video, learn how to remove the fuel tank from a Suzuki Samurai in simple steps. First, lift the car with jack stands and remove the breath…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos