Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Light Bulb

Model: Suzuki Swift MK 3 - Years 1994-2004
Part: Tail light bulb

To replace the brake light bulb in the rear lamp, you need to remove the lamp itself to access the bulb holder. This operation is quite simple; once you open the rear bonnet, unscrew the two fixing screws of the lamp located along the closure line of the bonnet and remove the lamp from its housing. Then, disconnect the bulb holder and extract the old bulb (bayonet fitting) to insert the new one. Ensure it is functioning correctly and reverse the process for installation by repositioning the bulb holder and then the lamp in its housing, tightening the respective fixing screws.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Light Bulb of the Suzuki Swift
Replacing the Brake Light Bulb of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Below are the instructions on how to remove and replace the rear light or stop bulb of the Suzuki Swift in simple, quick steps. First, open the boot …
Replacing the Rear Fog Light Bulb on a Suzuki Swift
Replacing the Rear Fog Light Bulb on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide will show you how to remove and replace the rear fog light bulb on a Suzuki Swift. First, move to the rear and disconnect the electrical c…
How to Replace the Bulb of the Rear Light of the Suzuki Swift
How to Replace the Bulb of the Rear Light of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this short and simple guide, you will see how to remove and replace the bulbs of the rear light of the Suzuki Swift. First, move to the rear and o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos