Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: V-belt

Follow these main instructions to remove and replace the service belt on the Suzuki Grand Vitara. First, open the bonnet of your car and begin loosening the tensioner using a socket spanner; check its condition and replace it if excessively worn. At this point, install the new trapezoidal belt in the correct direction, first loosening the tensioner and fitting it perfectly between the various pulleys; manually turn the engine to ensure it is properly seated!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.5L V6?
How to Replace the Serpentine Belt on a Suzuki Grand Vitara 2.5L V6?
Suzuki Grand Vitara (1999-2005 / MK 1) This guide outlines the steps to remove and replace the serpentine belt on a Suzuki Grand Vitara 2.5L V6. First, open the bonnet and begin by removin…
How to Adjust the Handbrake on a Suzuki Grand Vitara
How to Adjust the Handbrake on a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) Before you can begin, sit in the driver's seat of your Suzuki Grand Vitara. Start by moving the front seats all the way forward. Next, unscrew and re…
How to Remove the Clutch from a Suzuki Grand Vitara
How to Remove the Clutch from a Suzuki Grand Vitara
Suzuki Grand Vitara (1999-2005 / MK 1) Begin by lifting your Suzuki Grand Vitara, then remove the driveshaft, the lower cover supporting the gearbox, and anything else obstructing the extr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos