|
Do it yourself
| |||
| ||||
How to Remove the Glove Compartment from the Suzuki Baleno
Model: Suzuki Baleno
MK 2
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
With the following guide aimed at all of you owners of a second series Suzuki Baleno, you will be able to remove the glove compartment located inside the cabin in just a few seconds. All you need to do is get into the car and reach the front passenger seat, then open the glove compartment and locate the safety hooks on both sides. Once found, act on them to unclip the glove compartment and complete its removal. At this point, the removal procedure is successfully completed, and you can proceed with any replacement of the glove compartment.
Updated on 25 September 2026 by ScegliAuto
Related tutorials
Suzuki Baleno
(2015-2026 /
MK 2)
The procedure to independently replace the cabin air filter in your Suzuki Baleno second series (2015-2020) is practically identical to that used in …
Suzuki Baleno
(2015-2026 /
MK 2)
To change the time on a Suzuki Baleno, use the button below the instrument cluster to enter the settings menu. Once in the menu, look for the "Time" …
Suzuki Baleno
(2015-2026 /
MK 2)
Today's brief instructions will show you how to adjust the clutch on the Suzuki Baleno in simple and quick steps. It is necessary for the clutch peda…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |