|
Do it yourself
| |||
| ||||
Model: Sym Jet 180
You can replace the rear brake pads on the Sym Jet 180i by loosening the bolts that secure the brake caliper to the corresponding disc on the rear wheel. At this point, you can completely detach the caliper from its disc so that the pin inside can be extracted along with the pads. You can then position the new pads inside the caliper to insert the pin. Finally, secure the caliper onto the disc to ensure everything is functioning correctly.
Posted on 24 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Jet 180
To replace the oil filter on the Sym Jet 180, open the oil drain plug located at the bottom of the transmission casing: this will allow all the used …
Jet 180
This tutorial shows how to change the transmission oil in the SYM Jet 180 scooter, a very simple and quick operation. First, ensure the engine is com…
Jet 180
To replace the air filter on a Sym Jet 180, loosen the screws securing the cover located on the left side of the bike, near the rear wheel and above …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
