Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Oil in the SYM Jet 180 Scooter?

Model: Sym Jet 180
Part: Transmission fluid

Video tutorial

This tutorial shows how to change the transmission oil in the SYM Jet 180 scooter, a very simple and quick operation. First, ensure the engine is completely cold.

Then, position a container underneath the rear area of the transmission casing. Next, unscrew the filler bolt, remove the lower bolt, and allow all the oil inside the casing to drain out. At this point, insert the required amount of oil through the designated upper hole and reassemble everything.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on the Sym Jet 180
How to Replace the Oil Filter on the Sym Jet 180
Jet 180 To replace the oil filter on the Sym Jet 180, open the oil drain plug located at the bottom of the transmission casing: this will allow all the used …
How to Replace the Air Filter on a Sym Jet 180
How to Replace the Air Filter on a Sym Jet 180
Jet 180 To replace the air filter on a Sym Jet 180, loosen the screws securing the cover located on the left side of the bike, near the rear wheel and above …
How to replace the front brake pads on the Sym Jet 180i?
How to replace the front brake pads on the Sym Jet 180i?
Jet 180 You can replace the front brake pads on the Sym Jet 180i by loosening the screws that secure the brake caliper to its housing, which is located at th…

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos