|
Do it yourself
| |||
| ||||
Model: Sym Jet 180
To replace the oil filter on the Sym Jet 180, open the oil drain plug located at the bottom of the transmission casing: this will allow all the used oil to flow into a suitably placed container. Once the oil has drained, you can remove the oil filter located next to the breather plug, so it can be replaced with a new spare part. When the new filter is installed, you can refill the oil by pouring it through the breather on the left side of the bike.
Updated on 10 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Jet 180
This tutorial shows how to change the transmission oil in the SYM Jet 180 scooter, a very simple and quick operation. First, ensure the engine is com…
Jet 180
To replace the air filter on a Sym Jet 180, loosen the screws securing the cover located on the left side of the bike, near the rear wheel and above …
Jet 180
You can replace the rear brake pads on the Sym Jet 180i by loosening the bolts that secure the brake caliper to the corresponding disc on the rear wh…
|
How to Reset the Trip A Mileage on a BMW R1250 GS
This guide will show you the steps to reset the Trip A mileage on the BMW R1250 GS enduro motorcycle. First, place the bike on its centre stand and turn on the instrument panel. Navigate to the menu settings by pressing the button located on the left of the handlebars, and access the onboard computer where the partial mileage is displayed, as shown in the video. At this point, reset the partial mileage as indicated in the video; you can reset the partial mileage at any time. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.095
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
