Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Symphony 125
Part: Battery

First, remove the 4 screws from the cover on the footrest platform. Disconnect the plastic cover. Remove the upper screws from the positive and negative terminals. Pull the battery out of the compartment. To replace it, insert the new battery and proceed in reverse order of disassembly. Alternatively, it is possible to remove the six top caps from the battery and refill with acid, available at regular spare parts centres in special six-bottle containers. Refit the acid protection cap and reassemble the battery in reverse order of the scooter disassembly.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the time on the Sym Symphony 125 ST
How to change the time on the Sym Symphony 125 ST
Symphony 125 Let's briefly look at the instructions that will allow us to change the time on the display of the instrument panel of the Sym Symphony 125 ST scoote…
How to Reset the Service on a SYM Symphony 125 Scooter
How to Reset the Service on a SYM Symphony 125 Scooter
Symphony 125 In this tutorial, you will learn how to reset the service on a SYM Symphony 125 scooter, a very simple and quick operation to perform only after comp…
How do you replace the engine oil of the Sym Symphony 125?
How do you replace the engine oil of the Sym Symphony 125?
Symphony 125 To replace the engine oil of the Sym Symphony 125, you need to loosen the drain plug located in the central lower part of the motorcycle: once the pl…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos