Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Mio
Part: Battery

You can replace the battery of the Sym Mio by loosening the screws that secure the panel located at the back of the footwell and at the bottom of the underseat compartment. Once the fixing screws of these panels have been removed, you will need to detach the corresponding panels and slide the battery out of its housing after disconnecting the cables and loosening the screws. At this point, you can position the new battery in its housing, securing and connecting it properly; then cover everything with the panels to ensure everything works.

Posted on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mio Before you start, sit on the seat of your Sym Mio. Activate the instrument panel by turning the key in the ignition. Then, press the right button on …
Mio In order to replace the stand of the Sym Mio, you need to loosen the screws that hold it to its housing: in the central lower part of the vehicle you…
Mio In order to replace the variator of the Sym Mio scooter, you need to loosen the screws that secure the transmission cover panel: this will be located…

How to Remove the Fairings of the KTM EXC 500

In this brief and simple guide, you will find instructions to remove and replace all the plastic fairings of the KTM EXC 500. First, place your bike on a stand and start unscrewing the screws of the plastic fairings located on the sides; then remove the plastic cover of the fuel tank by unscrewing the side screws, followed by the removal of the front mudguard and the rear tail, as shown in the video. At this point, disconnect any wiring from the plastics, replacing them if necessary, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos