Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Mio
Part:

To replace the fairing of the Sym Mio, you will need to loosen all the screws that secure the panels corresponding to their housing. Start by loosening the screws that hold the front fairing, located under the corresponding headlight. Then, proceed to loosen the screws that secure the cover of the footrest compartment. After that, you can detach the panel around the under-seat compartment. The new panels that make up the fairing can then be inserted: you will need to secure them with the appropriate screws and check that they do not cause any issues while riding.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Shock Absorber on Sym Mio
Removing the Rear Shock Absorber on Sym Mio
Mio This video shows how to remove and replace the rear suspension on a Sym Mio scooter. First, remove the plastic engine cover and then take off the sco…
How to replace the headlight bulb in the Sym Mio?
How to replace the headlight bulb in the Sym Mio?
Mio To replace the headlight bulb in the Sym Mio, you need to unscrew the screws that secure the front fairing: these are located just below the headligh…
How do you replace the rear turn signal bulb of the Sym Mio?
How do you replace the rear turn signal bulb of the Sym Mio?
Mio In order to replace the rear turn signal bulb of the Sym Mio scooter, you need to loosen the screws that secure the rear fairing of the bike: to do t…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos