Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Simply 50cc

Replacing the Spark Plug on a Sym Simply 50cc

Model: Sym Simply 50cc
Part: Spark plugs

Video tutorial

Today, we will go through the main instructions for removing and replacing the spark plug on a Sym Simply 50cc scooter. First, open and lift the seat and remove the plastic cover found in the storage compartment by unscrewing the fixing screws; then, disconnect the attached electrical connector and access the top of the engine.

At this point, remove the spark plug lead and unscrew the spark plug using a socket wrench, replacing it with a new one of the correct type; screw it in by hand first, then tighten with the wrench!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Flyte Good morning, today you will replace the spark plug in your Sym Flyte. To start, open the scooter seat and then unclip and remove the bottom of the l…
Mio In this video tutorial, you will find instructions to remove the rear wheel from a Sym Mio 50cc scooter. First, position the scooter on the centre st…
Jet Power 125 In this video tutorial, you will learn how to remove and replace the engine spark plug on the Sym Jet Power 125 scooter in simple and quick steps. Fi…

How to Change the Engine Oil on the Kymco Like 200?

To change the engine oil on the Kymco Like 200, loosen the drain plug located at the central lower part of the bike: once this plug is removed, you can let all the used oil flow into a suitably positioned container. When all the lubricant has drained out, close the drain plug and top up the oil: this can be done by pouring oil into the breather located on the right side of the engine casing, just above the exhaust.

Watch the video!


by ScegliAuto

More videos