Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Nh X 125 : Oil change on Sym NH-X 125

Model: Sym Nh X 125
Part: Engine oil
Oil change on Sym NH-X 125

On Sym NH-X 125 a sensor detects when it is time to change the engine oil and sends you the relative warning light that will appear on the frame of the bike. When this happens, don't delay maintenance. Warm up the engine for a few minutes before changing the oil to make the lubricant less dense. Unscrew the 17 bolt located under the engine compartment and from which the used oil will drain, which you will have to collect in a container (dispose of it correctly). Re-tighten the 17 bolt and load the same amount of new oil (should be 1.2 liters) 10W-30 from the filling hole on the right side of the bike.


Posted on 11 January 2024 by ScegliAuto

How do you replace the belt on the Piaggio Beverly 350?

In order to replace the Piaggio Beverly 350 belt, first of all loosen the bolts that secure the protective cover of the crankcase located at the rear wheel. Once the crankcase has been opened, it will be possible to have access to the transmission: it will be necessary to unscrew the nut that fixes the central pin of the variator and also the one that fixes the central pin of the clutch: it will therefore be possible to remove the variator, then the clutch bell and all the his records. This will allow the belt to be removed and replaced; finally it will be possible to assemble all the parts previously removed.

Watch the video!


by ScegliAuto

More videos