Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Hd 300
Before you begin, sit on the seat of your Sym HD 300. Insert the key into the ignition barrel. Once the key is in, turn it fully clockwise. Next, pull and hold the brake lever, then press and hold the ignition button located below the throttle grip. Keep it pressed until the engine starts. When the engine is running, you can release the ignition button and the brake lever, successfully starting your Sym HD 300.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How the Instrument Cluster Works on the Sym HD 300
How the Instrument Cluster Works on the Sym HD 300
Hd 300 In today's video, you will learn about the complete operation of the instrument cluster on the Sym HD 300. These indications are also found in the us…

How to Replace the Rear Brake Pads on the Triumph Street Triple 765 RS?

In this tutorial, see how to replace the rear brake pads on the Triumph Street Triple 765 RS, a very simple and quick operation. Start by positioning yourself in front of the brake in question, then grip the caliper and press it firmly against the disc to compress the piston. Once done, release the indicated clip, remove the upper pin, and separate the old pads from the caliper. At this point, clean any dirt residue, insert the replacement pads, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos