Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid on the Sym HD 200

Model: Sym Hd 200 Evo
Part: Antifreeze coolant

Video tutorial

In this video tutorial, you will learn how to bleed and replace the coolant on the Sym HD 200 scooter in simple steps. First, remove the plastics located under the instrument panel by unscrewing all the fixing screws to access the radiator cap; then drain the old fluid by unscrewing the bleed screw found on the water pump.

At this point, remove the filler cap and pour the new coolant into the expansion tank, filling it to the maximum level (usually indicated by a mark).


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Sym HD 200?
How do you replace the exhaust pipe of the Sym HD 200?
Hd 200 Evo It will be possible to replace the muffler on the Sym HD 200 by loosening the screws that secure the exhaust terminal to its housing: once these scre…
How to Change the Gear Oil of the Sym HD 200
How to Change the Gear Oil of the Sym HD 200
Hd 200 Evo In this short and simple guide, you will see how to change the transmission oil of the Sym HD 200 scooter. First, place your scooter on the centre st…
How to Replace the Front Brake Pads on the Sym HD 200
How to Replace the Front Brake Pads on the Sym HD 200
Hd 200 Evo Discover in this brief guide how to remove and replace the front brake pads on the Sym HD 200 scooter, following the instructions below. First, place…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos