Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Sym HD 200

Model: Sym Hd 200 Evo
Part: Brake pads

Video tutorial

Discover in this brief guide how to remove and replace the front brake pads on the Sym HD 200 scooter, following the instructions below. First, place your scooter on the centre stand and start by unscrewing the fixing screws of the brake caliper to remove it from the disc.

Then, lever the piston of the caliper to extract the old brake pads, replacing them with new ones as shown in the video. At this point, clean the caliper of dirt before inserting the new pads; then reassemble everything!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Sym HD 200?
How do you replace the exhaust pipe of the Sym HD 200?
Hd 200 Evo It will be possible to replace the muffler on the Sym HD 200 by loosening the screws that secure the exhaust terminal to its housing: once these scre…
How to Replace the Radiator Fluid on the Sym HD 200
How to Replace the Radiator Fluid on the Sym HD 200
Hd 200 Evo In this video tutorial, you will learn how to bleed and replace the coolant on the Sym HD 200 scooter in simple steps. First, remove the plastics loc…
How to Reset the Oil Check Light on the Sym HD 200?
How to Reset the Oil Check Light on the Sym HD 200?
Hd 200 Evo To reset the Oil Check light on the Sym HD 200, you need to extract the dipstick for checking the oil level. If the level is between the maximum and …

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos