Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil of the Sym HD 200

Model: Sym Hd 200 Evo
Part: Transmission fluid

Video tutorial

In this short and simple guide, you will see how to change the transmission oil of the Sym HD 200 scooter. First, place your scooter on the centre stand and start unscrewing the oil drain bolt, which is located at the bottom of the left casing, allowing the old oil to drain into a container for about ten minutes; then unscrew the fill screw to let the oil flow out more quickly.

At this point, use a small funnel or a syringe to pour in the new transmission oil, following the video tutorial until the end!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Sym HD 200
How to Change the Engine Oil of the Sym HD 200
Hd 200 Evo Today, follow these step-by-step instructions to change the engine oil and oil filter of the Sym HD 200 scooter. First, place the scooter on its cent…
How to Reset the Oil Check Light on the Sym HD 200?
How to Reset the Oil Check Light on the Sym HD 200?
Hd 200 Evo To reset the Oil Check light on the Sym HD 200, you need to extract the dipstick for checking the oil level. If the level is between the maximum and …
How to Replace the Radiator Fluid on the Sym HD 200
How to Replace the Radiator Fluid on the Sym HD 200
Hd 200 Evo In this video tutorial, you will learn how to bleed and replace the coolant on the Sym HD 200 scooter in simple steps. First, remove the plastics loc…

How to Replace the Remote Battery of the Ducati Multistrada?

Replacing the remote battery of the Ducati Multistrada, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacement CR2032 battery and, if necessary, a small flat-head screwdriver. First, grasp the rear cover, then push it down firmly to detach it from the remote. Next, remove the circular white cap, take out the old battery, and insert the new one, ensuring the correct polarity. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos