Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Hd 200 Evo
Part: Engine oil

Today, follow these step-by-step instructions to change the engine oil and oil filter of the Sym HD 200 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then clean the small oil filter, replacing it if damaged. At this point, unscrew the filler cap and top up the oil, pouring in the correct type and filling to the level indicated by a mark on the dipstick.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Hd 200 Evo In this short and simple guide, you will see how to change the transmission oil of the Sym HD 200 scooter. First, place your scooter on the centre st…
Hd 200 Evo To reset the Oil Check light on the Sym HD 200, you need to extract the dipstick for checking the oil level. If the level is between the maximum and …
Hd 200 Evo In order to reset the Service light of the Sym HD 200 Evo, you need to remove the dipstick for checking the oil level. If the oil level is between th…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos