Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on Sym Joymax 250

Model: Sym Joymax 250
Part: Service warning light

Video tutorial

To reset the oil light on the Sym Joymax 250 scooter - after performing the required services from the service interval - turn on the ignition. Then, press the "S" button located at the base of the rev counter on the right side of the dashboard.

Hold it down for a few seconds; four or five will suffice. This will turn off the light and reset the service mileage, which will then show how many miles are left until the next full service.

To confirm, turn off the ignition and turn it back on. The light will be off.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Sym Joymax 250
Joymax 250 Before starting, sit on the rider's seat of your Sym Joymax 250. Begin by turning the key in the ignition switch to power up the instrument panel. Ne…
How to Reset the Service on the SYM Joymax 250 Scooter?
How to Reset the Service on the SYM Joymax 250 Scooter?
Joymax 250 In this tutorial, we will see how to reset the service on the SYM Joymax 250 scooter, a very simple and quick operation to perform only after complet…
How to Reset the Oil Light on Sym Jooymax 250
How to Reset the Oil Light on Sym Jooymax 250
Joymax 250 Maintaining the Sym Joymax is not as demanding as with other scooters. In fact, it is required every 10,000 miles, a mileage almost like that of a ca…

How to Replace the Temperature Sensor on the Aprilia RS 125

Today, we will see, in this short and simple guide, the instructions on how to remove and replace the temperature sensor on the Aprilia RS 125 motorcycle. First, place your motorcycle on a stand and start by removing the radiator hose, loosening the metal clamp, and draining the fluid into a container for about ten minutes; then remove the fuel tank to access the engine head. At this point, disconnect the electrical connector of the temperature sensor and unscrew it with a spanner to remove and replace it with the new one!

Watch the video!


by ScegliAuto

More videos