Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, sit on the rider's seat of your Sym Joymax 250. Begin by turning the key in the ignition switch to power up the instrument panel. Next, repeatedly press the left button on the instrument panel until you reach the time on the multifunction display. Once done, press and hold the reset button until the "Service" light turns off. After completing this last step, you will have successfully reset the "Service" light on your Sym Joymax 250.

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Oil Light on Sym Joymax 250
How to Reset the Oil Light on Sym Joymax 250
Joymax 250 To reset the oil light on the Sym Joymax 250 scooter - after performing the required services from the service interval - turn on the ignition. Then,…
How to Replace the Spark Plug on a Sym Joymax 250
How to Replace the Spark Plug on a Sym Joymax 250
Joymax 250 To replace the spark plug on the Sym Joymax 250, loosen the screws securing the left side panel of the scooter, located just above the footwell. Once…
How to change the engine oil in the SYM Joymax 250 scooter?
How to change the engine oil in the SYM Joymax 250 scooter?
Joymax 250 In this tutorial, you can see how to change the engine oil in the SYM Joymax 250 scooter, a very simple and quick operation. Before proceeding, wait …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos