Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Brake Pads on the Sym Wide Evo 125

Model: Sym Wide Evo 125
Part: Brake pads

Video tutorial

In this video tutorial, you will see how to disassemble and replace the front brake pads on the Sym Wide Evo 125 scooter. First, put your scooter on the centre stand and start unscrewing the mounting bolts of the front brake caliper to remove it from the disc.

Then, lever the caliper piston back in, removing and replacing the old pads with new ones, as shown in the video. At this point, clean the brake caliper of any residual dirt and reassemble everything, applying the reverse procedure!


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Wide Evo 125 Below are the main steps that will allow you to remove and replace the front wheel and tyre of the Sym Wide Evo 125 scooter. First, place your scoote…
Wide Evo 125 To replace the transmission of the Sym Wide Evo 125, loosen the screws securing the cover located near the rear wheel on the left side of the bike. O…
Wide Evo 125 To replace the levers on a Sym Wide Evo 125, loosen the bolts securing the front fairing. These bolts are located near the front headlight and above …

How to Change the Engine Oil and Oil Filter on a Keeway RKF 125

Today, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on a Keeway RKF 125. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one as shown in the video. At this point, unscrew the filler cap and pour in the new engine oil; start the engine and check that the level is at the maximum mark.

Watch the video!


by ScegliAuto

More videos