Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tata
  4. : Sumo Grande

Tata Sumo Grande - Video guides

Tata Sumo Grande (2008-2010 / MK 1)
Where Are the Fuses Located on a Tata Sumo Grande?

Inside the designated fuse boxes installed on the Tata Sumo Grande, you can find the fuses mounted on the vehicle: this type of vehicle has two boxes that …Read all…
Posted on 29 April 2026 by ScegliAuto
Tata Sumo Grande (2010-2014 / MK 2)
Repair the Central Locking of the Tata Sumo Grande

To repair the central locking of the Tata Sumo Grande, go under the steering column (since this is an Indian-built vehicle, it has right-hand drive), where you …Read all…
Posted on 13 October 2026 by ScegliAuto
Tata Sumo Grande (2010-2014 / MK 2)
How to Replace the Diesel Filter on a Tata Sumo?

To replace the diesel filter on a Tata Sumo, open the hood to locate the filter positioned on the left side of the engine compartment. To remove it, disconnect …Read all…
Posted on 21 September 2026 by ScegliAuto
Tata Sumo Grande (2010-2014 / MK 2)
How to Program the Key for the Tata Sumo Grande?

You can program a new remote key for the Tata Sumo Grande without going to the shop or using special, expensive tools or software. The procedure is very simple …Read all…
Posted on 28 July 2026 by ScegliAuto
Tata Sumo Grande (2008-2010 / MK 1)
How to Replace the Timing Belt on a Tata Sumo Grande?

To replace the timing belt on a Tata Sumo Grande, open the hood to access the components inside the engine compartment. The belt is located on the left side of …Read all…
Posted on 14 July 2026 by ScegliAuto

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos