Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repair the Central Locking of the Tata Sumo Grande

Model: Tata Sumo Grande MK 2 - Years 2010-2014

To repair the central locking of the Tata Sumo Grande, go under the steering column (since this is an Indian-built vehicle, it has right-hand drive), where you will find a multi-plug that connects to the CPU of this electronic device. Remove it for inspection. In this case, there were some unsoldered contacts, which could be repaired with a soldering iron and some skill. The YouTuber also removed the inner door cover to rule out that the issue with the door not closing could be due to any mechanism or wiring inside the door. By exclusion, he arrived at the electronic part. Unfortunately, he did not show how he removed the inner upholstery of the door, while it is evident that the CPU was in an accessible position under the steering column.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on a Tata Sumo Grande?
Where Are the Fuses Located on a Tata Sumo Grande?
Tata Sumo Grande (2008-2010 / MK 1) Inside the designated fuse boxes installed on the Tata Sumo Grande, you can find the fuses mounted on the vehicle: this type of vehicle has two boxes…
How to Replace the Timing Belt on a Tata Sumo Grande?
How to Replace the Timing Belt on a Tata Sumo Grande?
Tata Sumo Grande (2008-2010 / MK 1) To replace the timing belt on a Tata Sumo Grande, open the hood to access the components inside the engine compartment. The belt is located on the le…
How to Program the Key for the Tata Sumo Grande?
How to Program the Key for the Tata Sumo Grande?
Tata Sumo Grande (2010-2014 / MK 2) You can program a new remote key for the Tata Sumo Grande without going to the shop or using special, expensive tools or software. The procedure is v…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos