Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Tata Sumo?

Model: Tata Sumo Grande MK 2 - Years: 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

To replace the diesel filter on a Tata Sumo, open the hood to locate the filter positioned on the left side of the engine compartment. To remove it, disconnect the hoses connected to the filter, then loosen the mounting screws of the filter itself.

Once the screws are removed, take out the filter from its housing to replace it with a new part. After the replacement, reconnect and secure everything, checking for proper operation.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Program the Key for the Tata Sumo Grande?
How to Program the Key for the Tata Sumo Grande?
Tata Sumo Grande (2010-2014 / MK 2) You can program a new remote key for the Tata Sumo Grande without going to the shop or using special, expensive tools or software. The procedure is v…
How to Replace the Timing Belt on a Tata Sumo Grande?
How to Replace the Timing Belt on a Tata Sumo Grande?
Tata Sumo Grande (2008-2010 / MK 1) To replace the timing belt on a Tata Sumo Grande, open the hood to access the components inside the engine compartment. The belt is located on the le…
Where Are the Fuses Located on a Tata Sumo Grande?
Where Are the Fuses Located on a Tata Sumo Grande?
Tata Sumo Grande (2008-2010 / MK 1) Inside the designated fuse boxes installed on the Tata Sumo Grande, you can find the fuses mounted on the vehicle: this type of vehicle has two boxes…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos