Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Shell of the Tata Safari Storme

Model: Tata Safari Storme MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

To change the key shell of the Tata Safari Storme, start by prying open the new shell with a small flathead screwdriver. Next, take the old shell and remove the screw located in the part without buttons using a small screwdriver.

Use the flathead screwdriver to pry them apart. Once the old shell is open, remove the circuit board (using the small flathead screwdriver) and place it into the new shell in the same position as it was in the old shell.

From the old shell, take the small key chip (using the small flathead screwdriver) and place it in the same spot as before. Finally, take the new key blade and insert it into the new shell, snap the shells together until you hear a click, and tighten the screw.

Now you can test the new key by opening the car with both the buttons and the key, and finally, try starting the car with the key.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Tata Safari Storme (2012-2019 / MK 1) Replacing the remote battery in the Tata Safari Storme, as shown in this tutorial, is an extremely simple and quick task. To do this, you will only n…
Tata Safari Storme (2012-2019 / MK 1) This guide will show you how to remove and replace the fuel filter on the Tata Safari Storme. First, open the hood and locate the fuel filter; you wi…
Tata Safari Storme (2012-2019 / MK 1) You can program a new remote key for the Tata Safari Storme without needing an already programmed key or consulting a professional. The procedure is …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos