Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radio Antenna on a Tata Altroz

Model: Tata Altroz MK 1 - Years 2020-2026
Part: Antenna

If you want to customize your vehicle by replacing the antenna with a model that has a shorter mast and better performance in receiving radio channels, you can follow the instructions in this description and refer to images from the video. Proceed to purchase an aftermarket accessory that will have better performance and consists of the simple mast plus the mounting pins. Then, unscrew the stock antenna, insert the male pin into the socket, and screw in the new antenna; this will complete the job.

Updated on 24 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Tata Altroz (2020-2026 / MK 1) You can install a shark fin antenna on your vehicle; these are kits available for purchase online. To do this, follow these steps: remove the antenna…
Tata Altroz (2020-2026 / MK 1) To replace the radio in a Tata Altroz, use a tool to pry off the panel located above the instrument cluster. Once removed, unscrew the screws underne…
Tata Altroz (2020-2026 / MK 1) To replace the air filter on a Tata Altroz, open the hood to access the components inside the engine compartment. Here, loosen the screws that secure…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos