Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Tata Zest?

Model: Tata Zest MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

To reset the Service light on the Tata Zest, turn on the ignition and press the MODE button until the Service message appears with the miles remaining until the next service, which will show as 0. Once this screen is displayed, press and hold both the MODE and SET buttons for a few seconds until the 0 starts to blink.

At this point, release the buttons and then press and hold them again; this will reset the maintenance interval and the Service light will disappear from the instrument cluster.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Tata Zest (2014-2019 / MK 1) To reset the Service light on a Tata Zest, turn on the instrument panel by turning the ignition key in the ignition switch. Once the panel is on, pre…
Tata Zest (2014-2019 / MK 1) As shown in this tutorial, resetting the service light in a Tata Zest is a very simple and quick operation. Before proceeding, make sure to complete …
Tata Zest (2014-2019 / MK 1) As seen in this tutorial, resetting the service light in a Tata Zest is a very simple and quick operation. Before proceeding, ensure that all schedul…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos