Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Tgb
  4. : Target 550
To replace the exhaust on the TGB Target 550, loosen the fastening screws that secure it to the appropriate supports: once these screws are loosened, you can proceed to widen the connecting clamp between the exhaust tip and the corresponding manifold. At this point, you can remove the old exhaust from its position and insert the new one: this can now be secured with screws, connecting it to the manifold. After replacement, verify that everything is functioning correctly.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fe 550 The replacement of the exhaust pipe of the Husaberg FE 550 can be carried out by loosening the screws that fix it to its housing on the rear fender, …
Ak 550 To replace the exhaust of the Kymco AK 550, you need to loosen the screws that secure the exhaust tip to its housing, located near the rear wheel on …
Ak 550 The replacement of the muffler installed on the Kymco AK 550 can be carried out by loosening the screws that fix the exhaust terminal to the appropri…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos