Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tgb
    3. : Xmotion

Model: Tgb Xmotion
Part: Brake pads

In this video tutorial, you will see how to disassemble and replace the rear brake pads on the Tgb Xmotion scooter, following the instructions below. First, place the scooter on its centre stand and start by removing the exhaust silencer by unscrewing the fixing screws; once removed, unscrew the screws of the rear brake caliper, as shown in the video. At this point, extract the old pads and replace them with the new ones, first cleaning the caliper of dirt; then reassemble everything, following the video to the end!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the TGB Target 550?
How to Replace the Exhaust on the TGB Target 550?
Target 550 To replace the exhaust on the TGB Target 550, loosen the fastening screws that secure it to the appropriate supports: once these screws are loosened,…
How to Replace the Rear Brake Pads on an Aprilia RS 660
How to Replace the Rear Brake Pads on an Aprilia RS 660
Rs 660 In this guide, we will discover the instructions on how to disassemble and replace the rear brake pads on an Aprilia RS 660. First, place the motorcy…
How to Replace the Rear Brake Pads on the Infiniti JX 35
How to Replace the Rear Brake Pads on the Infiniti JX 35
Infiniti JX 35 (2012-2013 / L50) Follow this guide to remove and replace the rear brake pads on the Infiniti JX 35 with these simple steps. First, lift the vehicle and remove the rea…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos