Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tgb
    3. : Blade 1000

Model: Tgb Blade 1000
Part:

As shown in the video, start the maintenance by removing the seat and the plastic panel in front of it. Next, remove the side fairing on the variator side and then take off the plastic from the footwell. Remove the variator cover by disconnecting it at the lower attachment and unscrewing the fixing screws. Once uncovered, loosen the belt to extract it from its seat. Working in reverse, fit the new belt and ensure it is tensioned. Refit the cover and all the plastics that were initially removed. This is a simple operation but requires some time.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
How to Remove the Belt, Variator, and Clutch of the Keeway K-Blade 125
K Blade 125 This guide outlines the main steps to remove and replace the belt, variator, and clutch of the Keeway K-Blade 125 scooter. First, place the scooter o…
How do you replace the variator of the Keeway K-Blade 125?
How do you replace the variator of the Keeway K-Blade 125?
K Blade 125 In order to replace the variator of the Keeway K-Blade 125, you need to loosen the screws that secure the transmission cover, located near the rear w…
Replacing the Belt and Variator on a Piaggio Beverly 500
Replacing the Belt and Variator on a Piaggio Beverly 500
Beverly 500 This guide explains how to dismantle and replace the belt, rollers, and variator on a Piaggio Beverly 500 scooter. First, place the scooter on its ce…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos